Tag Archives: reading light

Jansjö Reading Light Conversion: running on 12 V, and never running out of light again, even in remote places!

How any would it be to have nice reading light at the garden house (or in the car), especially, a light without any smoke and hazard and hazzle like candle light! A light that keeps your eyes healthy. Well, at home, you can just use an IKEA Jansjö light for this purpose, which has a single 3 W LED installed.

All that is needed is a 12 V constant current board, LED driver. These are really cheap, so there is no need to build one yourself, you can just get it shipped from China directly, for a very reasonable price.

This board has a few nice components: 5 SS14 diodes (Schottky), 4 are used a bridge rectifier, 1 is used for the buck converter. There is a 47 Microhenry inductor, a 220 Mikrofarad (25 V) capacitor – and, the magic switch and regulator, a PT4115 device.

The PT4115 features a pretty straightforward design. It’s a step-down converter, can can drive over 1 Amp of current. The board I am using has a 0.22 Ohms current sense resistor, i.e., it is set to 0.1 V/0.22 Ohms = 0.46 A of current. This is plenty to drive the IKEA lamp.

The lamp itself will remain completely unmodified, just using a socket to connect to the original plug (which used to plug into a mains-powered LED driver of similar current rating). The connection to the 12 V system of the garden house is done via a “cigarette lighter” plug.

To protect the driver board, all sealed up in hot glue! It’s not perfect, but it works!

Finally, not much more to say, it works just fine!